Hall Effect Prober

Custom Made On Request

　THIS HALL EFFECT PROBER CAN BE EQUIPPED WITH HOT CHUCK TO PROBE AT TEMPERATURE AND SHIELDING BOX FOR LOW CURRENT MEASUREMENT.IN ADDITION,CUSTOMER COULD SPECIFY THE MAGNETIC GAUSS RATE TO FULLY MEET CUSTOMER’S REQUIREMENT AT THE VERY AFFORDABLE PRICE.

　There are two magnetic cores each with linear slide underneath moving to the chuck from each side to the probing position with locking mechanism.The chuck X-Y could be moved with 1”-1” travel to locate the measurement target.The chuck could be raised up to the probing position with probing height adjustable if needed.The tip on the micropositioner is precisely positioned X-Y then landed by the knob Z.Other tips could be positioned and landed by the same way.Once the measurement over,you just need to lower the chuck with all the tips held at the same height and spacing one another.
The prober comes with the hot chuck.If you want to measure at certain temperature,all you need to do is to set the temperature on PID controller. Once the measurement over, you could cool down the chuck by the closed- loop cooling system quickly.For the low signal measurement,we provide the total solution for different level requirement like coaxial and triaxial tip holder for customer’s choice with the shelding box as standard.